The control valve is widely used in oil refining and chemical industry. It is used to control the flow rate, pressure and liquid level of the fluid in the production process...

Working condition of high temperature including high temperature, high temperature Ⅰ Ⅱ, high temperature, high temperature Ⅲ Ⅳ, high temperature, high temperature Ⅴ level...

Manual valve is a valve operated by handle and handwheel. It is a common valve used in equipment pipeline.Its handle, hand wheel rotation direction clockwise is closed, counterclockwise is open.

Pre-maintenance of new valves before operation is a progressive construction concept to protect valve seat seals from seat damage during installation, welding and commissioning

The sealing surface is the most critical working face of the valve, the quality of the sealing surface directly affects the service life of the valve

After entering winter, the temperature drops rapidly, the valve often appears the situation of freezing.If left untreated at this point, the pipeline is vulnerable to failure.If it is in some high-risk conditions...

The electric explosion-proof ball valve has the characteristics of simple structure, quick switching, large flow capacity, zero leakage and so on. It is suitable for the occasions of high viscosity, containing fiber and solid particle fluid.

What does the valve arrow on the body mean?The arrow on the body indicates the recommended pressure direction of the valve, not the direction of medium flow...

The use of pneumatic ball valves requires good maintenance of these equipment.It is also a very complicated job to maintain the equipment.It's a lot of work...

Valve is the most common equipment in chemical enterprises. It seems easy to install the valve, but if it is not executed according to the relevant technology, safety accidents will occur

The reason why the valve has a good sealing effect in the process of use, is because it needs effective transport and contact medium in the process of use, low temperature gate valve is also widely used in the current market

Corrosion has long been one of the most troublesome hazards of chemical equipment. A slight mistake can damage the equipment, or even cause accidents or disasters.

Valves are used to control the flow of liquid and gas.Ball valves, gate valves and globe valves are used to control the flow of liquids.These various forms of valves are used to create waterways

Difference and selection of high platform ball valve and common ball valve

Fluorine lined valves are subject to environmental requirements